Brother P-Touch PT-H300 Page 64 User Manual Download | Manualshive

Page: 64 / 73

background image

58

What to do when...

TROUBLESHOOTING

What to do when...

Problem

Solution

The screen ‘locks’, or
the P-touch labeler
does not respond
normally.

Refer to “Resetting the P-touch Labeler” on page 56 and reset
the internal memory to the initial settings. If resetting the P-
touch labeler does not solve the problem, disconnect the AC
adapter and remove the batteries for more than 10 minutes.

The display remains
blank after turning on
the power.

Check that the batteries are correctly installed and that the AC
adapter designed exclusively for your P-touch labeler
(provided) is correctly connected.
Check that the rechargeable Li-ion battery is fully charged.

The LCD messages are
displayed in a foreign
language.

Refer to “Setting Language and Unit” on page 24 to select your
desired language.

The label is not printed
after pressing the Print
key.

• Check that text has been entered and that the tape cassette

is installed correctly with sufficient tape remaining.

• If the tape is bent, cut off the bent section and thread the tape

through the tape exit slot.

• If the tape is jammed, remove the tape cassette and then pull

out the jammed tape and cut it. Check that the end of the tape

passes through the tape guide before reinstalling the tape

cassette.

The label is not printed
correctly.

• Remove the tape cassette and reinstall it, pressing it firmly

until it clicks into place.

• If the print head is dirty, clean it with a cotton swab or optional

print head cleaning cassette (TZe-CL4).

The ink ribbon is
separated from the ink
roller.

If the ink ribbon is broken, replace
the tape cassette. If not, leave the
tape uncut and remove the tape
cassette, then wind the loose ink
ribbon onto the spool as shown in
the figure.

The P-touch labeler
stops while printing a
label.

• Replace the tape cassette if striped tape is visible, as this

indicates that you have reached the end of the tape.

• Replace all batteries or connect the AC adapter directly to the

P-touch labeler.

Label files saved
previously are now
empty.

All files stored in the internal memory are deleted if the
batteries are weak or the AC adapter was disconnected.

The tape jam which
cannot be cleared
easily occurred.

Please contact our customer service.

Spool

«
...
62
63
64
65
66
...
»

Summary of Contents for P-Touch PT-H300










































































Reviews:

No comments

Related manuals for P-Touch PT-H300

Brand: TEFAL Pages: 76

Brand: Hamilton Beach Pages: 44

Brand: Hamilton Beach Pages: 44

Brand: Hamilton Beach Pages: 28

GAGGIA MAGENTA MILK

Brand: Gaggia Milano Pages: 76

Brand: Toastmaster Pages: 64

Brand: BOSKA Pages: 9

GRAND CAFE BOLOGNA 242137

Brand: Princess Pages: 28

Dual Brew Pro CFP300

Brand: Ninja Pages: 15

Brand: Palsonic Pages: 14

Crem EX3 1GR MINI Control

Brand: Welbilt Pages: 36

Brand: Quick MILL Pages: 10

Brand: Curtiss Pages: 12

Brand: bonVIVO Pages: 2

Brand: GeekChef Pages: 20

Brand: NEFF Pages: 134

blue LB 1200 USA CLASSY PRO 120V

Brand: LAVAZZA Pages: 54

Brand: Hendi Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands