Brother P-Touch PT-H300 User Manual Download

Page: 29 / 73

ING

AR
TE
D

Turning Power On/Off

Press the

Power

key to turn the P-touch labeler on.

Press the

Power

key again to turn the P-touch labeler off.

Auto Power-Off Time

Feed function

The Feed function feeds 0.98" (25mm) of blank tape.

Press the

Shift

key and then press the

Print

key.

The message "Feeding Tape... Please Wait" appears while the tape is fed.

LCD Contrast

You can change the contrast setting of the LCD display to one of five levels (+2, +1, 0, -1,

-2) to make the screen easier to read. The default setting is “0”.

Press the

Menu

key to display the setup menu, select “Adjustment” using the or

key, and then press the

Enter

key.

Select "LCD Contrast" using or key and set the value using or key.

Press the

Enter

key.

Turning Power On/Off

• Your P-touch labeler has a power saving function that automatically turns itself off if no key is pressed within a

certain time under certain operating conditions. Refer to the Auto Power-Off Time table below for details.

• If the batteries are installed or the P-touch labeler is connected to an electrical outlet by the AC adapter, the

previous session’s information is displayed when the power is turned on.

With AC adapter

5 minutes

With battery

5 minutes

Feeding Tape

• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to be

discharged with the tape.

• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape to jam.

1
2

LCD Display

2
3

• Press the

Escape

key to return to the previous step.

• Pressing the

Space

key on the contrast setting screen sets the contrast to the default value “0”.

Summary of Contents for P-Touch PT-H300










































































Search results

Summary of Contents for P-Touch PT-H300

Reviews:

Related manuals for P-Touch PT-H300

Brands by name

Popular brands

Brother P-Touch PT-H300, User Manual

Search results

Summary of Contents for P-Touch PT-H300

Reviews:

Related manuals for P-Touch PT-H300

Brands by name

Popular brands