Brother P-Touch PT-E800W User Manual Download Page 196

Page: 196 / 254

Resetting the P-touch Labeling System

185

Resetting Data Using the Settings in the Home screen

Select [

Settings

] in the Home screen using the , ,

key, and then press the

Enter

key.

Select [

Reset

] using the or key, and then press the

Enter

key.

Resetting Data Using the Printer Setting Tool

You can use the Printer Setting Tool from a computer to perform the following operations for the P-touch
labeling system:



Deleting the templates and databases



Deleting the print log



Resetting Wi-Fi settings



Resetting printer settings to factory settings

For more information, see

Changing the P-touch Labeling System Settings

on page 82.

Value

Details

Reset All Settings

Transferred data (templates, databases, and transferred symbols), registered
programs and the contents in the file memory are NOT cleared.

Other data is cleared and all settings except the Wi-Fi settings are reset to
factory settings.

Erase All Content

Transferred data (templates, databases, and transferred symbols), registered
programs and the contents in the file memory are cleared.

Other data is NOT cleared and settings are NOT reset.

Factory Default

All data, customized settings, and the Wi-Fi settings are reset to factory
settings.

Reset Wi-Fi Settings

All Wi-Fi settings are reset to factory settings.

Summary of Contents for P-Touch PT-E800W































































































































































































































































Search results

Summary of Contents for P-Touch PT-E800W

Reviews:

Related manuals for P-Touch PT-E800W

Brands by name

Popular brands

Brother P-Touch PT-E800W, User Manual

Search results

Summary of Contents for P-Touch PT-E800W

Reviews:

Related manuals for P-Touch PT-E800W

Brands by name

Popular brands