Brother P-touch mini' tech, Service Manual, Page: 35 / 45

III
- 20
INFO submode (Dial position 1 and Enter key*)
(*In any other submode, setting the select dial to Dial position 1 and pressing the Enter key
will jump to INFO submode, except during checking in DIAL submode.)
The moment the machine enters the inspection mode, it shows "INFO," indicating
that the machine is placed in INFO submode.
In INFO submode, you may check the destination, head rank, voltage level, and LCD
operation.
1) Press the Enter key.
The following screen (sample) will appear where you may check the destination,
head rank, and voltage level.
Head rank Voltage level
Destination
If the destination is UK, for example, "UK" will display.
(The destination is determined by solder points 1 through 5.)
Solder points
ROM
spec.
Destination
The LCD
shows:
1 2 3 4 5
GE Germany GE H H H H H
England UK H H H H H
France FR L H H H H
Netherlands
(Holland)
HO H L H H H
Spain SP L L H H H
Italy IT H H L H H
Sweden SW L H L H H
Norway NO H L L H H
Switzerland SZ H H H L H
EU
Belgium BE L H H L H
H (High): Solder point opened, L (Low): Solder point closed
Head rank
Generally " " will display.
Solder points A through C are reserved for future use for thermal head ranking.
Unless otherwise specified, all of those solder points should be opened.
Voltage level
If the voltage level is within the specified range (9.0
±
0.2V), "0" will display. If not,
"X" will display.
Destination