Brother P-touch H500 User Manual Download Page 54

Page: 54 / 62



RESET

ING
& M

ANCE

Maintenance

Your P-touch should be cleaned on a regular basis to maintain its performance and life span.

Cleaning the Unit

Wipe any dust and marks from the main unit using a soft, dry cloth.
Use a slightly dampened cloth on difficult areas to remove marks.

Cleaning the Print Head

Streaks or poor quality characters on printed labels generally
indicates that the print head is dirty. Clean the print head using
a cotton swab or the optional print head cleaning cassette

(TZe-CL4).

1. Print head

Cleaning the Tape Cutter

Tape adhesive can build up on the cutter blade after repeated

use, blunting the blade which may result in the tape jamming in
the cutter.

Maintenance

Always remove the batteries and disconnect the AC adapter before cleaning the

P-touch.

Do not use paint thinner, benzene, alcohol or any other organic solvent. These may

deform the case or damage the appearance of your P-touch.

• Do not touch the print head directly with your bare

hands.

• Refer to the instructions provided with the print head

cleaning cassette for directions on how to use it.

• About once every year, wipe the cutter blade using a

cotton swab moistened with Isopropyl alcohol

(rubbing alcohol).

• Do not touch the cutter blade directly with your bare

hands.

Summary of Contents for P-touch H500































































Search results

Summary of Contents for P-touch H500

Reviews:

Related manuals for P-touch H500

Brands by name

Popular brands

Brother P-touch H500, User Manual

Search results

Summary of Contents for P-touch H500

Reviews:

Related manuals for P-touch H500

Brands by name

Popular brands