Brother P-touch 9500PC, Quick Reference

Page: 339 / 353

104
■
Cleaning tape
Use the TZ-CL6 cleaning tape with a tape
width of 36 mm (sold separately) to clean the
PT-9500PC easily.
1
Press the cover release button and open
the tape compartment cover.
2
Remove the tape cassette and install the
cleaning tape.
3
Close the tape compartment cover.
4
Press the feed/cut button.
→
Cleaning will start.
5
Press the cover release button and open
the tape compartment cover.
When the rollers stop, press the cover
release button.
6
Remove the cleaning tape, reinstall the
tape cassette, and then close the tape
compartment cover.
Cleaning the cutter
If the printed labels are not ejected from the
PT-9500PC correctly, clean the cutter for
cutting the labels.
1
Turn off the PT-9500PC.
2
Press the cover release button and open
the tape compartment cover.
3
Remove the tape cassette.
4
Use a cotton swab to clean the cutter.
Note
●
For further details on using the cleaning
tape, refer to the instruction manual
included with the cleaning tape.
Cutter blade
Cotton swab
Metal section