Brother P-Touch 580C User Manual Download Page 83

Page: 83 / 188

Eight different typeface, or fonts, are available on this machine. The fonts are:

F1 (Helsinki)

TITLE F2 (Calgary)

F2 (Brussels)

TITLE F3 (Florida)

F3 (Bermuda)

TITLE F4 (Istanbul)

TITLE F1 (San Diego)

TITLE F5 (US)

The default setting is font F1.

The TITLE fonts are only available if the message consists of only one line
or if 1/2” (12-mm)-, 3/4” (18-mm)-or 1” (24-mm)-wide tape is installed.
In addition, letters entered using a TITLE font will only appear in uppercase.

TO ENTER TEXT WITH A DIFFERENT FONT:

(1) Insert the cursor where you wish to begin using a new font.

(2) Press the

FONT

key until the sample character is displayed in the font you wish

to use and your desired font is shown by the indicators above the LCD display.

(3) Enter the text to which the chosen font is no be applied.

TO APPLY A FONT TO A SELECTED AREA:

(1) Press the

AREA

key, then use the cursor keys to select the text to which you

want to apply a new font.

(2) Press the

FONT

key until the text is displayed in the font you wish to use and

your desired font is shown by the indicators above the LCD display.

(3) Press the

RETURN

key to apply the chosen font to the selected text.

Summary of Contents for P-Touch 580C





























































































































































































Search results

Summary of Contents for P-Touch 580C

Reviews:

Related manuals for P-Touch 580C

Brands by name

Popular brands

Brother P-Touch 580C, User Manual

Search results

Summary of Contents for P-Touch 580C

Reviews:

Related manuals for P-Touch 580C

Brands by name

Popular brands