manualshive.com logo in svg

Brother MFC-T800W, Basic User'S Manual

Share
Download
Brother MFC-T800W Basic User'S Manual Download Page 71

Troubleshooting 

63

B

Cannot Print

Refill [XX] Ink

The amount of remaining ink in one or 
more of the ink tanks is low. The 
machine will stop all print operations.

This error message may appear if the 
ink dot counter is incorrect even if 
some ink remains.

Refill the ink tank.

When you refill the ink tank, fill the ink 
up to the upper line, or fill with all of 
the ink in the bottle if it does not 
exceed the upper line.

A message may appear on the LCD 
to verify whether the ink tanks were 
refilled. 
Press 

1

(

Yes

) to reset the ink dot 

counter if ink tank has been refill. 
Press 

2

(

No

) if ink tank has not been 

refilled.

(See 

Refilling the ink tanks

 

on page 53.)

Clean Unable XX

Init Unable XX

Print Unable XX

Scan Unable XX

The machine has a mechanical 
problem.

Open the scanner cover and remove 
any foreign objects and paper scraps 
from inside the machine. If the error 
message continues, do the following.

See 

Transferring your faxes or Fax 

Journal report

 on page 69 before 

disconnecting the machine so you will 
not lose any important messages. 
Then disconnect the machine from 
the power for several minutes and 
reconnect it.

A foreign object, such as a paper clip 
or a piece of ripped paper, is in the 
machine.

Close Ink Cover

The ink tank cover is not locked in the 
closed position.

Firmly close the ink tank cover until it 
locks into place.

Comm.Error

Poor telephone line quality caused a 
communication error.

If the problem continues, call the 
telephone company and ask them to 
check your telephone line.

Cover is Open

The scanner cover is not locked in the 
closed position.

Lift the scanner cover, and then close 
it again.
Make sure the telephone line cord 
and USB cable (if used) has been 
guided correctly through the cable 
channel and out the back of the 
machine.

Data Remaining

Print data is left in the machine's 
memory.

Press 

Stop/Exit

. The machine will 

cancel the job and clear it from the 
memory. Try to print again.

Disconnected

The other person or other person's 
fax machine stopped the call.

Try to send or receive again. 
If calls are stopped repeatedly and 
you are using a VoIP (Voice over IP) 
system, try changing the 
Compatibility to Basic (for VoIP). (See 

Telephone line interference / VoIP

 

on page 91.)

Error Message

Cause

Action

Summary of Contents for MFC-T800W








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands