Brother MFC-J985W Online User'S Manual Download Page 12

Page: 12 / 588

Important Note

•

Do not use this product outside the country of purchase as it may violate the wireless telecommunication and
power regulations of that country.

•

Not all models are available in all countries.

•

Windows

XP in this document represents Windows

XP Professional, Windows

XP Professional x64

Edition and Windows

XP Home Edition.

•

Windows Server

2003 in this document represents Windows Server

2003, Windows Server

2003 x64

Edition, Windows Server

2003 R2 and Windows Server

2003 R2 x64 Edition.

•

Windows Server

2008 in this document represents Windows Server

2008 and Windows Server

2008 R2.

•

In this User's Guide, the LCD messages of the MFC-J985DW are used unless otherwise specified.

•

In this User's Guide, the illustrations of the MFC-J985DW are used unless otherwise specified.

•

Unless otherwise specified, the screens in this manual are from Windows

7 and OS X v10.9.x. Screens on

your computer may vary depending on your operating system.

•

The contents of this guide and the specifications of this product are subject to change without notice.

Related Information

•

Before You Use Your Brother Machine

Summary of Contents for MFC-J985W












































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MFC-J985W

Reviews:

Brother MFC-J985W, Online User'S Manual, Page: 12 / 588

Search results

Summary of Contents for MFC-J985W

Reviews: