Brother MFC-J775DW Online User'S Manual Download Page 45

Page: 45 / 500

Home >

Paper Handling

Load Paper

Acceptable Paper and Other Print Media

> About Envelopes

About Envelopes

•

Use envelopes that weigh from 20 to 25 lb (80 to 95 g/m²).

•

Some envelope sizes require that you set margins in the application. Make sure you do a test print first before
printing many envelopes.

IMPORTANT

DO NOT use envelopes that:
•

Are loosely constructed

•

Have windows

•

Are embossed (have raised writing on them)

•

Have clasps or staples

•

Are pre-printed on the inside

•

Are self-adhesive

•

Have double flaps

Self-adhesive Double flaps

You may experience paper feed problems caused by the thickness, size and flap shape of the envelopes you
are using.

•

Before loading envelopes in the tray, press the flaps, edges and corners to make them as flat as possible, as
shown in the illustrations.

Fan the stack of envelopes well to avoid paper jams and misfeeds.

IMPORTANT

If envelopes are "double-feeding," load one envelope in the paper tray at a time.

Related Information

•

Acceptable Paper and Other Print Media

Summary of Contents for MFC-J775DW




















































































































































































































































































































































































































































































































Search results

Summary of Contents for MFC-J775DW

Reviews:

Related manuals for MFC-J775DW

Brands by name

Popular brands

Brother MFC-J775DW, Online User'S Manual

Search results

Summary of Contents for MFC-J775DW

Reviews:

Related manuals for MFC-J775DW

Brands by name

Popular brands