manualshive.com logo in svg

Brother MFC-J2330DW, User Manual, Page: 723 / 814

Share
Download
Brother MFC-J2330DW User Manual Download Page 723

 Home > 

Routine Maintenance

 > Pack and Ship Your Brother Machine

Pack and Ship Your Brother Machine

•

When you transport the machine, use the packing materials that came with your machine. If you do not pack
the machine correctly, any damage that may occur in transit may not be covered by your warranty.

•

The machine should be adequately insured with the carrier.

IMPORTANT

It is important to allow the machine to “park” the print head after a print job. Listen carefully to the machine
before unplugging it to make sure that all mechanical noises have stopped. Not allowing the machine to finish
this parking process may lead to print problems and possible damage to the print head.

1. Unplug the machine from the electrical socket.
2. Using both hands, use the finger holds on each side of the machine to lift the scanner cover into the open

position. Then unplug the machine from the telephone wall socket and take the telephone line cord out of the
machine.

3. Unplug the interface cable from the machine, if it is connected.
4. Remove the orange protective part from its storage place inside the machine.

5. Gently close the scanner cover using the finger holds on each side.

6. Open the ink cartridge cover.
7. Press the ink release levers to release the ink cartridges and then take out the ink cartridges.
8. Install the orange protective part and then close the ink cartridge cover.

716

Summary of Contents for MFC-J2330DW















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments