manualshive.com logo in svg

Brother MFC-J2330DW, User Manual, Page: 694 / 814

Share
Download
Brother MFC-J2330DW User Manual Download Page 694

 Home > 

Routine Maintenance

 > 

Clean Your Brother Machine

 > Clean the Outside of the Machine

Clean the Outside of the Machine

IMPORTANT

•

Use neutral detergents. Cleaning with volatile liquids such as thinner or benzine will damage the outside
surface of the machine.

•

DO NOT use cleaning materials that contain ammonia.

•

DO NOT use isopropyl alcohol to remove dirt from the control panel. It may crack the panel.

1. If the paper support flap is open, close it, and then close the paper support.
2. Pull the paper trays (1) completely out of the machine as shown by the arrow.

1

1

3. Wipe the outside of the machine with a dry, lint-free cloth to remove dust.

4. Remove the tray top cover and remove anything that is stuck inside the paper tray.

5. Wipe the inside and the outside of the paper tray with a dry, lint-free cloth to remove dust.

687

Summary of Contents for MFC-J2330DW















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments