manualshive.com logo in svg

Brother MFC-J1010DW, Online User'S Manual

Share
Download
Brother MFC-J1010DW Online User'S Manual Download Page 468

 Home > 

Routine Maintenance

 > Pack and Ship Your Machine

Pack and Ship Your Machine

•

When you transport the machine, use the packing materials that came with your machine. Do not tip or turn
the product upside down. If you do not pack the machine correctly, any damage that may occur in transit may
not be covered by your warranty.

•

The machine should be adequately insured with the carrier.

IMPORTANT

It is important to allow the machine to “park” the print head after a print job. Listen carefully to the machine
before unplugging it to make sure that all mechanical noises have stopped. Not allowing the machine to finish
this parking process may lead to print problems and possible damage to the print head.

1. Unplug the machine from the AC power outlet.
2. Unplug the machine from the telephone wall jack and take the telephone line cord out of the machine.
3. Using both hands, use the finger holds on each side of the machine to lift the scanner cover into the open

position.

4. Unplug the interface cable from the machine, if it is connected.
5. Gently close the scanner cover using the finger holds on each side.

6. Open the ink cartridge cover.
7. Press the ink release levers to release the ink cartridges and then take out the ink cartridges.
8. Install the orange protective part and then close the ink cartridge cover.

IMPORTANT

•

Make sure the plastic tab on the left side of the orange protective part (1) locks securely into place (2).

462

Summary of Contents for MFC-J1010DW
























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands