manualshive.com logo in svg

Brother MFC-J1010DW, Online User'S Manual

Share
Download
Brother MFC-J1010DW Online User'S Manual Download Page 45

 Home > 

Paper Handling

 > 

Load Paper

 > 

 Load Paper in the Paper Tray

 >  Load Envelopes in the Paper

Tray

Load Envelopes in the Paper Tray

•

If the 

[Check Paper]

 setting is set to 

[On]

 and you pull the paper tray out of the machine, a message

appears on the LCD, allowing you to change the paper size and paper type.

•

You can load envelopes in a variety of sizes. See 

Related Information

: 

Paper Type and Paper Size for

Each Operation

.

　

•

When you load envelopes in the tray, you must change the Paper Size setting in the machine or the paper
size setting on your computer.

•

Before loading envelopes in the tray, press the corners and sides of the envelopes to make them as flat as
possible.

1. If the paper support flap (1) is open, close it, and then close the paper support (2).

2

1

2. Pull the paper tray completely out of the machine.

3. Lift the output paper tray cover (1).

1

4. Load up to 10 envelopes in the paper tray with the printing surface 

face down

. Loading more than 10

envelopes may cause paper jams.

39

Summary of Contents for MFC-J1010DW
























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands