manualshive.com logo in svg

Brother MFC-J1010DW, Online User'S Manual

Share
Download
Brother MFC-J1010DW Online User'S Manual Download Page 37

 Home > 

Paper Handling

 > 

Load Paper

 > 

 Load Paper in the Paper Tray

 > Load Cut-Sheet Paper or Photo

2L Paper in the Paper Tray

Load Cut-Sheet Paper or Photo 2L Paper in the Paper Tray

•

If the 

[Check Paper]

 setting is set to 

[On]

 and you pull the paper tray out of the machine, a message

appears on the LCD, allowing you to change the paper size and paper type.

•

Load only one size and type of paper in the paper tray at a time.

•

When you load a different paper size in the tray, you must change the Paper Size setting in the machine or
the paper size setting on your computer.

1. If the paper support flap (1) is open, close it, and then close the paper support (2).

2

1

2. Pull the paper tray completely out of the machine.

3. Lift the output paper tray cover (1).

1

4. Gently press and slide the paper width guides (1) and then the paper length guide (2) to fit the paper size.

31

Summary of Contents for MFC-J1010DW
























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands