Brother MFC-J1010DW Online User'S Manual Download Page 172

Page: 172 / 535

> Preview New Faxes

Preview New Faxes

Related Models

: MFC-J1170DW

When a fax is received, a message appears on the LCD.

•

This feature is available only for black and white faxes.

•

To see a fax you already previewed, press

[Fax]

and

[Received Faxes]

1. Press

to view new faxes.

2. The fax list includes old and new faxes. A green mark appears next to new faxes.

Press the fax you want.

If you want to print or delete all the faxes in the list, press

[Print/Delete]

Do one of the following:
•

Press

[Print All(New Faxes)]

to print all faxes you have not yet viewed.

•

Press

[Print All(Old Faxes)]

to print all faxes you have viewed.

•

Press

[Delete All(New Faxes)]

to delete all faxes you have not yet viewed.

•

Press

[Delete All(Old Faxes)]

to delete all faxes you have viewed.

3. Perform the following operations by pressing the buttons shown in the table:

166

Summary of Contents for MFC-J1010DW























































































































































































































































































































































































































































































































































Search results

Summary of Contents for MFC-J1010DW

Reviews:

Brands by name

Popular brands

Brother MFC-J1010DW, Online User'S Manual

Search results

Summary of Contents for MFC-J1010DW

Reviews:

Brands by name

Popular brands