Brother MFC-9120CN User Manual Download Page 145

Page: 145 / 264

Troubleshooting and routine maintenance

129

The headers or footers appear
when the document displays on the
screen but they do not show up
when it is printed.

There is an unprintable area on the top and bottom of the page. Adjust the top and
bottom margins in your document to allow for this. (See

Unprintable area

on page 17.)

The machine is not printing or has
stopped printing.

Press

Job Cancel

As the machine cancels the job and clears it from the memory it may produce an
incomplete printout.

Scanning difficulties

Difficulties

Suggestions

TWAIN errors appear while
scanning.

Make sure that the Brother TWAIN driver is chosen as the primary source. In
PaperPort™ 11SE, click

File

Scan or Get Photo

and choose the Brother TWAIN

driver.

OCR does not work.

Try increasing the scanning resolution.

Network scanning does not work.

See

Network difficulties

on page 130.

Cannot scan.

(For MFC-9320CW only) Contact your administrator to check your Secure
Function Lock Settings.

Software difficulties

Difficulties

Suggestions

Cannot install software or print.

Run the

Repair MFL-Pro Suite

program on the CD-ROM. This program will repair

and reinstall the software.

Cannot perform ‘2 in 1’ or ‘4 in 1’
printing.

Check that the paper size setting in the application and in the printer driver are the
same.

The machine does not print from
Adobe

Illustrator

Try to reduce the print resolution. (See

Advanced tab

in the

Software User’s Guide

on the CD-ROM.)

Paper handling difficulties

Difficulties

Suggestions

The machine does not load paper.

The LCD shows

No Paper

or a

Paper Jam message.

If there is no paper, load a new stack of paper into the paper tray.

If there is paper in the paper tray, make sure it is straight. If the paper is curled,
you should straighten it. Sometimes it is helpful to remove the paper, turn the
stack over and put it back into the paper tray.

Reduce the amount of paper in the paper tray, and then try again.

Make sure that manual feed mode is not chosen in the printer driver.

Clean the paper pick-up roller. See

Cleaning the paper pick-up rollers

on page 163.

If the LCD shows the Paper Jam message and you still have a problem, see

Paper jams

on page 149.

The machine does not feed paper
from the manual feed slot.

Make sure that

Manual

is chosen in the printer driver.

Make sure the paper or print media is loaded properly in the manual feed slot.
See

Loading paper in the manual feed slot

on page 13.

Printing difficulties (continued)

Difficulties

Suggestions

Summary of Contents for MFC-9120CN









































































































































































































































































Search results

Summary of Contents for MFC-9120CN

Reviews:

Brother MFC-9120CN, User Manual, Page: 145 / 264

Search results

Summary of Contents for MFC-9120CN

Reviews: