Brother MFC-8440 User Manual Download Page 160

Page: 160 / 426

MAKING COPIES

10 - 19

Duplex (2 in 1) and Duplex (4 in 1) (For MFC-8840D)

Press

(

Copy

)

to illuminate it in green. Place the

document face up in the ADF, or face down on the scanner
glass.

Use the dial pad to enter the number of copies you want
(up to 99).

Press

Duplex/N in 1

and

select

Duplex(2 in 1)

Duplex(4 in 1)

Press

Set

Press

to select

Portrait1

Portrait2

Landscape1

Landscape2

Press

Set

Press

Start

to scan the document.

If you placed the document in the ADF, the MFC starts printing.

—

If you placed the document on the scanner glass, go to Step 6.

Place the next document on the scanner glass.

Select

and press

Set

or press

to copy next page.

After all the pages of the document have been scanned,
select

and press

Set

or press

to print.

Summary of Contents for MFC-8440











































































































































































































































































































































































































































Search results

Summary of Contents for MFC-8440

Reviews:

Brands by name

Popular brands

Brother MFC-8440, User Manual

Search results

Summary of Contents for MFC-8440

Reviews:

Brands by name

Popular brands