30
For Wireless Network Users
One push configuration using Wi-Fi Protected Setup or AOSS™
(Windows
®
and Macintosh)
19
Configure the wireless
settings
a
Confirm your WLAN access point/router has
the Wi-Fi Protected Setup or AOSS™ symbol
as shown below.
b
Place the Brother machine within range of your
Wi-Fi Protected Setup or AOSS™ access
point/router. The range may differ depending
on your environment. Refer to the instructions
provided with your access point/router.
c
On your machine, press
Menu
,
6
(
Network
),
2
(
WLAN
),
3
(
WPS/AOSS
).
When
WLAN Enable ?
is displayed, press
1
to choose
On
. This will start the wireless setup
wizard.
Otherwise press
Stop/Exit
to exit from the
wireless setup wizard.
When
Start WPS/AOSS on your
wireless access point/router.
appears, press the Wi-Fi Protected Setup or
AOSS™ button on your wireless access
point/router. See the user’s guide for your
wireless access point/router for instructions.
And then press
OK
.
This feature will automatically detect which
mode (Wi-Fi Protected Setup or AOSS™) your
access point/router uses to configure your
machine.
d
A connection result message appears on the
LCD and a WLAN report will automatically be
printed.
If the connection failed, check the error code on
the printed report and refer to
To install the MFL-Pro Suite, continue to
step
.
For Windows
®
Users:
Now go to
For Macintosh Users:
Now go to
Note
If your wireless access point/router supports
Wi-Fi Protected Setup (PIN Method) and you
want to configure your machine using the PIN
(Personal Identification Number) Method, see
Using the PIN Method of Wi-Fi Protected Setup
in
the
Network User's Guide
.
Wireless setup is now complete. A four
level indicator at the right of your
machine’s LCD will show the wireless
signal strength of your access
point/router.
