27
For Wireless Network Users
Wireless Network
Windows
®
M
acin
tosh
h
Choose
Temporarily use a USB cable
(Recommended)
and then click
Next
.
i
Temporarily connect the USB cable (not
included) directly to the computer and the
machine.
j
If the confirmation screen appears, check the
box and click
Next
. When the following screen
appears, check
Yes
if you want to connect with
the listed SSID. Click
Next
and go to
k
The wizard will search for wireless networks
available from your machine. Choose the SSID
that you wrote down for your network in
step
on page 24, and then click
Next
.
l
If your network is not configured for
Authentication and Encryption, the following
screen will appear. To continue configuration,
click
OK
.
m
Enter the
Network Key
you wrote down in
on page 24 and then enter the key
again in
Confirm Network Key
, then click
Next
.
Note
• If the list is blank, check that the access point
has power and is broadcasting the SSID, and
then see if the machine and the access point
are within range for wireless communication.
Then, click
Refresh
.
• If your access point is set to not broadcast the
SSID you can manually add it by clicking the
Advanced
button. Follow the on-screen
instructions for entering the
Name (SSID)
, and
then click
Next
.
