Setup Send
3 - 4
3
Automatic transmission
This is the easiest way to send a fax.
Do not pick up the handset of the external
phone. Press
Start
immediately after dialling.
(For an example of automatic faxing, follow
the steps in
3-3.)
Manual transmission (with an
external telephone only)
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
1
If it is not illuminated in green, press
(
Fax
).
2
Load your document.
3
Pick up the handset of the external
phone and listen for a dial tone.
4
On the external phone, dial the fax
number you want to call.
5
When you hear the fax tone, press
Start
.
6
Replace the handset of the external
phone.
Out of Memory message
If you get an
Out of Memory
message while
scanning the first page of a fax, press
Stop/Exit
to cancel the fax.
If you get an
Out of Memory
message while
scanning a subsequent page, you will have
the option to press
Start
to send the pages
scanned so far, or to press
Stop/Exit
to
cancel the operation.
Note
If you get an
Out of Memory
message while
faxing and you do not want to delete your
stored faxes to clear the memory, you can
send the fax in real time. (See
