Brother MFC 7460DN Basic User'S Manual Download Page 33

Page: 33 / 170

How to load

documents

You can send a fax, make copies, and scan
from the ADF (Automatic Document Feeder)
and the scanner glass.

Using the automatic
document feeder (ADF)

The ADF can hold up to 35 pages and feeds
each sheet individually. Use standard 80 gsm
paper and always fan the pages before
putting them in the ADF.

Document Sizes Supported

IMPORTANT

• DO NOT use paper that is curled,

wrinkled, folded, ripped, stapled, paper-
clipped, pasted or taped.

• DO NOT use cardboard, newspaper or

fabric with the ADF. Instead use the
scanner glass.

• To avoid damaging your machine while

using the ADF, DO NOT pull on the
document while it is feeding.

Note

• To scan documents that are not suitable

for the ADF, see

Using the scanner glass

(Flatbed)

on page 24.

• It is easier to use the ADF if you are

loading a multiple page document.

• Make sure documents with correction fluid

or written with ink are completely dry.

How to load documents

Lift up and unfold the ADF document
output support flap (1). Unfold the ADF
document support (2).

Fan the pages well.

Loading documents

Length:

147.3 to 355.6 mm

Width:

147.3 to 215.9 mm

Weight:

64 to 90 gsm

(2)

(1)

Summary of Contents for MFC 7460DN











































































































































































Search results

Summary of Contents for MFC 7460DN

Reviews:

Brands by name

Popular brands

Brother MFC 7460DN, Basic User'S Manual

Search results

Summary of Contents for MFC 7460DN

Reviews:

Brands by name

Popular brands