Brother MFC 7345N - Laser Multifunction Center User Manual Download Page 8

vi

BROTHER MULTIFUNCTION CENTER / FAX MACHINE

LIMITED WARRANTY 

(Canada only)

Pursuant to the limited warranty of 1 year from the date of purchase for labour and parts, Brother

International Corporation (Canada) Ltd. (“Brother”), or its Authorized Service Centres, will repair or

replace (at Brother’s sole discretion) this MFC/Fax machine free of charge if defective in material or

workmanship. This warranty applies only to products purchased and used in Canada. 
This limited Warranty does not include cleaning, consumables (including, without limitation, ink

cartridges, print cartridges, print rolls, thermal paper rolls, toner cartridges, drum units, OPC belts, fixing

units, print heads, paper feed rollers, transfer rolls, cleaning rollers, waste toner packs, oil bottles) or

damage caused by accident, neglect, misuse or improper installation or operation, any damage caused

from service, maintenance, modifications, or tampering by anyone other than a Brother Authorized

Service Representative, or if shipped out of the country. 
The use of supplies or consumable items that are non-Brother products may void your warranty. This

limited warranty ceases when this machine is rented, sold, or otherwise disposed of. Operation of the

MFC/Fax machine in excess of the specifications or with the Serial Number or Rating Label removed

shall be deemed abuse and all repairs thereafter shall be the sole liability of the end-user/purchaser. 

In order to obtain warranty service, the MFC/Fax machine must be delivered or shipped freight prepaid

by the end-user/purchaser to a “Brother” Authorized Service Centre, together with your Canadian Proof

of Purchase in the form of a Sales Receipt.
When shipping or transporting your MFC/Fax machine, please refer to your Operation Manual for the

proper packaging procedures.
For Laser units: Failure to remove the Toner Cartridge (and Toner Drum Unit, waste toner packs or oil

bottles on applicable models) during shipping or transport will cause severe damage to the Laser

MFC/Fax machine and will void the Warranty. 
For inkjet units: (When shipping your Inkjet MFC/Fax machine remove the ink cartridges and replace

them with the original protective parts. If original protective parts are not available, leave ink cartridges

installed. Please avoid shipping the unit without original protective parts or ink cartridges.) Damage to

your print head resulting from packing the Inkjet MFC/Fax machine without the ink cartridges or the

protective parts will void your warranty. 
Improper packaging may cause severe damage to the machine during shipping and will void the

warranty.
BROTHER DISCLAIMS ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING,

WITHOUT LIMITATIONS, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE, EXCEPT TO THE EXTENT THAT ANY WARRANTIES IMPLIED

BY LAW CANNOT BE VALIDLY WAIVED.
No oral or written information, advice or representation provided by Brother, its Authorized Service

Centres, Distributors, Dealers, Agents or employees, shall create another warranty or modify this

warranty. The warranty states Brother’s entire liability and your exclusive remedy against Brother for any

failure of the MFC/Fax machine to operate properly.
Neither Brother nor anyone else involved in the development, production, or delivery of this MFC/Fax

machine shall be liable for any indirect, incidental, special, consequential, exemplary, or punitive

damages, including lost profits, arising from the use of or inability to use the product, even if advised by

the end user/purchaser of the possibility of such damages. Since some Provinces do not allow the above

limitation of liability, such limitation, may not apply to you.

This Limited Warranty gives you specific legal rights and you may also have other rights which

vary from Province to Province.

Warranty Service is available at Brother Authorized Service

Centres throughout Canada. For Technical Assistance or for the

name and location of your nearest Authorized Service Centre

call 1-877-BROTHER.
Internet support: [email protected] or browse Brother’s Web Site www.brother.ca.

Summary of Contents for MFC 7345N - Laser Multifunction Center

































































































































































































Reviews: