manualshive.com logo in svg

Brother MFC 7345N - Laser Multifunction Center, User Manual

Share
Download
Brother MFC 7345N - Laser Multifunction Center User Manual Download Page 33

Loading paper and documents

19

2

a

Unfold the ADF document output 
support flap (1) and the ADF support 
flap (2).

 

b

Fan the pages well.

c

Place your document, face up top edge 
first, in the ADF until you feel it touch the 
feed roller.

d

Adjust the paper guides (1) to fit the 
width of your document.

 

Using the scanner glass

2

You can use the scanner glass to fax, copy or 
scan pages of a book or one page at a time.
Documents can be up to 8.5 in. wide and 
11.7 in. long (215.9 mm wide and 297 mm 
long).

Note

To use the scanner glass, the ADF must 
be empty.

 

a

Lift the document cover.

b

Using the document guidelines on the 
left, center the document face down on 
the scanner glass.

 

 

c

Close the document cover.

CAUTION

 

If the document is a book or is thick do not 
slam the cover or press on it.

 

2

1

1

Summary of Contents for MFC 7345N - Laser Multifunction Center

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands