Brother MFC 7345N - Laser Multifunction Center User Manual Download Page 3

Page: 3 / 192

Brother numbers

IMPORTANT

For technical help, you must call the country where you bought the machine. Calls must be
made

from within

that country.

Register your product

By registering your product with Brother International Corporation, you will be recorded as the

original owner of the product. Your registration with Brother:

may serve as confirmation of the purchase date of your product should you lose your receipt;

may support an insurance claim by you in the event of product loss covered by insurance; and,

will help us notify you of enhancements to your product and special offers.

Please complete and fax the Brother Warranty Registration And Test Sheet or, for your

convenience and most efficient way to register your new product, register on-line at

http://www.brother.com/registration/

FAQs (frequently asked questions)

The Brother Solutions Center is our one-stop resource for all your Fax Machine/Multi-Function

Center needs. You can download the latest software and utilities and read FAQs and

troubleshooting tips to learn how to get the most from your Brother product.

http://solutions.brother.com/

Note

You can check here for Brother driver updates.
To keep your machine performance up to date, check here for the latest firmware upgrade (for
Windows

only).

For Customer Service

Service Center Locator (USA only)

For the location of a Brother authorized service center, call 1-877-BROTHER (1-877-276-8437).

Service Center Locations (Canada only)

For the location of a Brother authorized service center, call 1-877-BROTHER.

In USA:

1-877-BROTHER (1-877-276-8437)

1-901-379-1215 (fax)

In Canada:

1-877-BROTHER

(514) 685-4898 (fax)

Summary of Contents for MFC 7345N - Laser Multifunction Center

































































































































































































Search results

Summary of Contents for MFC 7345N - Laser Multifunction Center

Reviews:

Brands by name

Popular brands

Brother MFC 7345N - Laser Multifunction Center, User Manual

Search results

Summary of Contents for MFC 7345N - Laser Multifunction Center

Reviews:

Brands by name

Popular brands