Brother MFC 7345N - Laser Multifunction Center, User Manual

Page: 124 / 192

110
Out of Memory
The machine’s memory is full. Fax sending or copy operation in
progress
Do one of the following:
„ Press Start to send or copy the scanned
pages.
„ Press Stop/Exit and wait until the other
operations in progress finish, and then try
again.
„ Clear the data from the memory. (See
Out of memory message on page 38 or
page 75.)
Print operation in process
Do one of the following:
„ Reduce print resolution. (See Advanced
tab in the Software User’s Guide on the
CD-ROM
.)
„ Clear the faxes from the memory. (See
Out of memory message on page 75.)
Print Unable XX
The machine has a mechanical
problem. Do one of the following:
„ (MFC-7440N only)
See
Transferring your faxes or Fax
Journal report on page 111 before
disconnecting the machine so you will
not lose any important messages.
Then, disconnect the machine from the
power for several minutes and then
reconnect it.
„ (MFC-7840W only)
Disconnect the machine from the power
for several minutes, then reconnect it.
(The machine can be turned off for
approximately 4 days without losing
faxes stored in the memory. See
Transferring your faxes or Fax Journal
report
on page 111.)
Error Message Cause Action