manualshive.com logo in svg

Brother MFC-7340, User Manual, Page: 96 / 194

Share
Download
Brother MFC-7340 User Manual Download Page 96

86

A

Choosing a location

A

Place your machine on a flat, stable surface that is free of vibration. Put the machine near a 
telephone socket and a standard, grounded electrical socket. Choose a location where the 
temperature remains between 10

°

 C and 32.5

°

 C and the humidity is between 20% to 80% 

(without condensation).

„

Make sure cables leading to the machine do not constitute a trip hazard.

„

Avoid placing your machine on the carpet.

„

Do not place near heaters, air conditioners, water, chemicals or refrigerators.

„

Do not expose the machine to direct sunlight, excessive heat, moisture or dust.

„

Do not connect your machine to electrical sockets controlled by wall switches or automatic 
timers, or to the same circuit as large appliances that might disrupt the power supply.

„

Avoid sources of interference, such as speakers or the base units of cordless phones.

Safety and legal

A

 

 

 

Summary of Contents for MFC-7340



































































































































































































Reviews:

No comments