Brother MFC 6890CDW, User Manual, Page: 86 / 248

Chapter 7
70
Before you choose the ring pattern to
register
7
You can only register one Distinctive Ring
pattern with the machine. Some ring patterns
cannot be registered. The ring patterns below
are supported by your Brother machine.
Register the one your telephone company
gives you.
Note
Ring Pattern #1 is often called Short-Short
and is the most commonly used.
If the ring pattern you received is not on
this chart,
please call your telephone
company and ask for one that is
shown
.
„ The machine will only answer calls to its
registered number.
„ The first two rings are silent on the
machine. This is because the fax must
‘listen’ to the ring pattern (to compare it to
the pattern that was ‘registered’). (Other
telephones on the same line will ring.)
„
If you program the machine properly, it will
recognize the registered ring pattern of the
‘fax number’ within 2 ring patterns and
then answer with a fax tone. When the
‘voice number’ is called, the machine will
not answer.
Registering the Distinctive Ring
pattern
7
Very Important!
After you have set the Distinctive Ring feature
to On, your Distinctive Ring number will
receive faxes automatically. The receive
mode is automatically set to
Manual
and you
cannot change it to another receive mode
while Distinctive Ring is set to On. This
ensures the Brother machine will only answer
the Distinctive Ring number and not interfere
when your main telephone number is called.
a
Press
MENU
.
b
Press
a
or
b
to display
Fax
.
c
Press
Fax
.
d
Press
a
or
b
to display
Miscellaneous
.
e
Press
Miscellaneous
.
f
Press
a
or
b
to display
Distinctive
.
g
Press
Distinctive
.
h
Press
Set
.
i
Press the stored ring pattern you want to
use.
Press
OK
.
(You will hear each pattern as you scroll
through the four patterns. Make sure
you choose the pattern that the
telephone company gave you.)
j
Press Stop/Exit .
Distinctive Ring is now set to On.
Ring
Pattern Rings
1 long-long
2 short-long-short
3 short-short-long
4 very long (normal
pattern)