Brother MFC-6800, Owner'S Manual

Page: 82 / 222

9 - 2
R E M O T E F A X O P T I O N S
4
If your pager requires a PIN, enter the PIN, press # , press Redial/Pause , enter
your MFC telephone number followed by
# #
, and then press
Menu/Set
.
For example , 1 2 3 4 5 # Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #
— OR —
If you do not need a PIN, press Redial/Pause , enter the fax number of your
MFC followed by
# #
, and then press
Menu/Set
.
For example, Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #
5
Press Stop/Exit .
Setting Fax Storage
If you set Fax Storage to ON , you will be able to retrieve fax messages from
another location using Fax Forwarding, Paging, or Remote Retrieval functions.
The LCD will indicate when you have a fax stored in memory.
1
Press Menu/Set , 2 , 5 , 2 . The LCD
prompts you to choose a fax setting.
2
Press to select ON (or OFF ), and
then press
Menu/Set
.
3
Press
Stop/Exit
.
Backup Print
If you have set FAX STORAGE to ON , your MFC automatically prints a faxes
as they are received into memory, This is a safety feature in ease the power goes
out so you won’t lose your message.
You cannot change a Paging number or PIN remotely.
Note
Press Redial/Pause for each 3.5 second delay, as needed.
If there are faxes in memory when you
turn the Fax Storage
OFF , the LCD
prompts you to erase any faxes in
memory.
If you press
1
, all fax data is erased and Fax Storage is turned off. If you press
2 , data is not erased, and Fax Storage remains on.
(See Printing a Fax in Memory , page 5-5.)
2.FAX STORAGE
or
1.YES 2.NO
ERASE ALL FAX?