manualshive.com logo in svg

Brother MFC-590, Owner'S Manual

Share
Download
Brother MFC-590 Owner'S Manual Download Page 10

   Preparation and Simple Use Guide   

1

PREP

ARA

TION

AND SIMPLE USE

Preparation and Simple Use Guide

Steps to prepare and use the machine simply

Follow the steps below to prepare and use the machine simply.

However, before you perform these steps, see Important Safety Information (page 137), and 
Advice for Preparation and Simple Use Guide (page 5).

If you need further information, refer to BASIC FAX USE or ADVANCED FAX USE.

1

Read the Quick Setup Guide

Follow the instructions on the Brother Quick Setup Guide to set up the machine.

2

Setting the Document

You can scan the document for faxing and copying from either the ADF (Automatic Document 
Feeder) or from the glass platen.

Using the ADF (Automatic Document Feeder)

The automatic document feeder (ADF) can hold up to 30 pages, feeding each one individually 
through the machine. Use standard (75 g/m

2

) paper when using the ADF. Always fan the pages 

well before placing them in the feeder.

Recommended Environment

Temperature:    20-30˚C (68-86˚F)
Humidity:         50%-70%

DO NOT use curled, wrinkled, folded, or ripped paper, or paper with 
staples, paper clips, paste or tape attached. DO NOT use cardboard, 
newspaper, or fabric. (To copy or scan this kind of document, see 

Using 

the Glass Platen

, page 3.)

■

Make sure documents written with ink are completely dry.

■

Documents must be from 14.8 to 21.6 cm wide, and from 14.8 to 35.6 cm long.

Unfold the document tray 
extension.
Unfold the document stopper.

Document
Stopper

Document
tray extension

1

2

Summary of Contents for MFC-590





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands