Brother MFC 495CW - Color Inkjet - All-in-One User Manual Download Page 98

Page: 98 / 224

Chapter 11

Sorting copies using the ADF

You can sort multiple copies. Pages will be
stacked in the order 321, 321, 321, and so on.

Press (

Copy

Load your document.

Enter the number of copies you want.

Press

to choose

Stack/Sort

Press

to choose

Sort

Press

If you do not want to change additional
settings, press

Black Start

Color Start

Note

Fit to Page

Page Layout

and

Book Copy

are not available with

Sort

Adjusting Brightness and
Contrast

Brightness

You can adjust the copy brightness to make
copies darker or lighter.

Press (

Copy

Load your document.

Enter the number of copies you want.

Press

to choose

Brightness

Press

to make a darker copy or

press

to make a lighter copy.

Press

If you do not want to change additional
settings, press

Black Start

Color Start

Contrast

You can adjust the copy contrast to help an
image look sharper and more vivid.

Press (

Copy

Load your document.

Enter the number of copies you want.

Press

to choose

Contrast

Press

to increase the contrast or press

to decrease the contrast.

Press

If you do not want to change additional
settings, press

Black Start

Color Start

Summary of Contents for MFC 495CW - Color Inkjet - All-in-One

































































































































































































































Search results

Summary of Contents for MFC 495CW - Color Inkjet - All-in-One

Reviews:

Brands by name

Popular brands

Brother MFC 495CW - Color Inkjet - All-in-One, User Manual

Search results

Summary of Contents for MFC 495CW - Color Inkjet - All-in-One

Reviews:

Brands by name

Popular brands