Brother MFC 495CW - Color Inkjet - All-in-One User Manual Download Page 37

Page: 37 / 224

Loading paper and documents

Loading documents

You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.

Using the ADF

The ADF can hold up to 15 pages and feeds
each sheet individually. Use standard 20 lb
(80 g/m

) paper and always fan the pages

before putting them in the ADF.

Recommended environment

Document Sizes Supported

How to load documents

IMPORTANT

• DO NOT pull on the document while it is

feeding.

• DO NOT use paper that is curled,

wrinkled, folded, ripped, stapled, paper
clipped, pasted or taped.

• DO NOT use cardboard, newspaper or

fabric.

Make sure documents with ink or liquid
correction fluid are completely dry.

Unfold the ADF Document Output
Support Flap (1).

Fan the pages well.

Adjust the paper guides (2) to fit the
width of your document.

Make sure you place your document,

face down

top edge first

in the ADF

underneath the guides until you feel it
touch the feed roller and the LCD shows

ADF Ready

IMPORTANT

DO NOT leave a thick document on the
scanner glass. If you do this, the ADF may
jam.

Temperature:

68 to 86

F (20 to 30

Humidity:

50 to 70%

Paper:

20 lb LTR (80 g/m

A4)

Length:

5.8 to 14 in. (148 to 355.6 mm)

Width:

5.8 to 8.5 in. (148 to 215.9 mm)

Weight:

17 to 24 lb (64 to 90 g/m

)

Summary of Contents for MFC 495CW - Color Inkjet - All-in-One

































































































































































































































Search results

Summary of Contents for MFC 495CW - Color Inkjet - All-in-One

Reviews:

Brands by name

Popular brands

Brother MFC 495CW - Color Inkjet - All-in-One, User Manual

Search results

Summary of Contents for MFC 495CW - Color Inkjet - All-in-One

Reviews:

Brands by name

Popular brands