Brother MFC 3360C - Color Inkjet - All-in-One User Manual Download Page 107

Page: 107 / 140

Troubleshooting and Routine Maintenance

Lift the output paper tray cover and wipe
the inside and outside of the paper tray
with a soft cloth to remove dust.

Close the output paper tray cover and
put the paper tray firmly back in the
machine.

Cleaning the scanner

Unplug the machine, open the panel
cover (1). Clean the white bar (2) and
the glass strip (3) with isopropyl alcohol
on a soft lint-free cloth.

Cleaning the machine printer
platen

WARNING

Unplug the machine from the AC power
outlet before cleaning the printer platen (1).

Clean the machine printer platen (1) and
the area around it, wiping off any
scattered ink with a soft,

dry

, lint-free

cloth.

Summary of Contents for MFC 3360C - Color Inkjet - All-in-One













































































































































Search results

Summary of Contents for MFC 3360C - Color Inkjet - All-in-One

Reviews:

Brands by name

Popular brands

Brother MFC 3360C - Color Inkjet - All-in-One, User Manual

Search results

Summary of Contents for MFC 3360C - Color Inkjet - All-in-One

Reviews:

Brands by name

Popular brands