Brother MFC-235C, User Manual

Page: 42 / 156

Chapter 6
32
Receive mode settings
6
Ring Delay
6
The Ring Delay sets the number of times the
machine rings before it answers in
Fax Only
or
Fax/Tel
mode. If you have external or
extension telephones on the same line as the
machine, choose the maximum number of
rings.
(See Operation from extension
telephones on page 46 and Fax
Detect on page 33.)
a
Press Menu , 2 , 1 , 1 .
b
Press
a
or
b
to choose how many times
the line rings before the machine
answers (
02
-
10
for Australia,
01
-
10
for
New Zealand,
00
-
10
for some
countries).
Press
OK .
If you choose
00
, the line will not ring at
all.
c
Press Stop/Exit .
F/T Ring Time
(Fax/Tel mode only)
6
If you set the Receive Mode to
Fax/Tel
, you
need to decide how long the machine will
signal you with its special pseudo/double-ring
when you have a voice call. If it's a fax call,
the machine receives the fax.
This pseudo/double-ring happens after the
initial ringing from the telephone company.
Only the machine rings and no other
telephones on the same line will ring with the
special pseudo/double-ring. However, you
can still answer the call on any telephone on
the same line as the machine. (See
Operation from extension
telephones
on page 46.)
a
Press Menu , 2 , 1 , 2 .
b
Press
a
or
b
to choose how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or 70
seconds for Australia and some
countries, 20, 30, 40 or 55 seconds for
New Zealand).
Press
OK .
c
Press Stop/Exit .
Note
Even if the caller hangs up during the
pseudo/double-ringing, the machine will
continue to ring for the set time.