Brother MFC-235C User Manual Download Page 16

Page: 16 / 156

Loading documents

You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.

Using the ADF
(MFC-260C only)

The ADF can hold up to 10 pages and feeds
each sheet individually. Use standard 80 gsm
paper and always fan the pages before
putting them in the ADF.

Recommended environment

Document Sizes Supported

How to load documents

CAUTION

DO NOT pull on the document while it is
feeding.

DO NOT use paper that is curled, wrinkled,
folded, ripped, stapled, paper clipped,
pasted or taped.

DO NOT use cardboard, newspaper or fabric.

Make sure documents written with ink are
completely dry.

Fan the pages well. Make sure you put
the documents

face down, top edge

first

in the ADF until you feel them touch

the feed roller.

Adjust the paper guides to fit the width of
your documents.

Unfold the ADF Document Output
Support Flap (1).

CAUTION

DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.

Loading documents and paper

Temperature:

20 to 30

Humidity:

50% to 70%

Paper:

80 gsm A4

Length:

148 to 355.6 mm

Width:

148 to 215.9 mm

Weight:

64 to 90 gsm

Summary of Contents for MFC-235C





























































































































































Search results

Summary of Contents for MFC-235C

Reviews:

Brands by name

Popular brands

Brother MFC-235C, User Manual

Search results

Summary of Contents for MFC-235C

Reviews:

Brands by name

Popular brands