Brother M Print MW-260 User Manual Download Page 41

Page: 41 / 45

Indicator lights

Status indicator light

A blue or green light indicates the printer is
operating correctly, while a red light indicates
an error has occurred.

When the status indicator light is blue, it is possible to receive data

using both the Bluetooth and USB interfaces. However, once a

connection is established using one of the interfaces, data cannot

be received using the other interface until printing is complete.

If an error has occurred, check for the following causes.

Indicator

light color

Indicator light

status

Printer status

Blue

Constantly lit

Waiting to receive data using Blue-
tooth or the USB

Flashing

Communicating (receiving print data)

Flashing in
long intervals

Sleep mode (power-saving standby
condition, possible only when receiving
data using Bluetooth)

Green

Constantly lit

Waiting to receive data using USB or IrDA

Flashing

Communicating (receiving print data)

Red

Flashing

An error has occurred.

Constantly lit

A system error has occurred.

Error description

Remedy

There is no paper cassette
installed.
The paper cassette is installed
facing the wrong direction.
There is no more paper.

Correctly install a paper cas-
sette containing paper.

A paper misfeed occurred.

Remove the misfed paper.

A transmission error occurred. Check the transmission status.

An overheat error occurred.

The inside of the printer has started
to overheat. Wait until it cools down

Summary of Contents for M Print MW-260














































Search results

Summary of Contents for M Print MW-260

Reviews:

Related manuals for M Print MW-260

Brands by name

Popular brands

Brother M Print MW-260, User Manual

Search results

Summary of Contents for M Print MW-260

Reviews:

Related manuals for M Print MW-260

Brands by name

Popular brands