4
Charging
This printer is equipped with a lithium-ion battery. Use the AC
adapter designed specifically for this printer to charge the bat-
tery.
After purchasing this printer, be sure to charge the battery fully
before using it.
1
Plug the AC adapter
cable into the AC
adapter connector on the
printer.
2
Plug the AC adapter plug
into a household electri-
cal outlet (AC 110V-
120V).
Charging of the lithium-ion
battery automatically begins.
→
The charging indicator light comes on in
orange.
→
When charging is finished, the charging
indicator light goes off.
→
If the charging indicator does not light up
in orange, the battery may not be correctly installed.
3
After charging is finished, disconnect the AC
adapter.
#
MW-260 cannot be operated only with the AC
adapter if the rechargeable lithium-ion battery is not
installed.
Summary of Contents for M Print MW-260
Page 45: ......