- 23 -
Manual feeding and manual cutting
You can feed and cut the document manually using the Cool Laminator.
(1)
Set the document on the document tray.
(2)
Press “Feed” to feed the document manually.
The “Feed” button is a self-repeating key. The
document will continue to be fed until the
“Feed” button is released. Keep pressing the
“Feed” button until you see the end of the
document.
(3)
Press (cut button). The document will be cut
at its current position. If you cannot remove the
document from the machine after this procedure,
use the Feed button and press (cut button).
Note
-For safety, the exact cutting position is not
visible from outside of the machine.
-To avoid accidentally cutting through your
document, it is recommended that you press
only after the document has been
completely ejected from the machine.
-Never remove a document from the machine
by force. If necessary, use scissors.
Summary of Contents for LX-900
Page 1: ...1 e H Owner s Manual ...
