LK3-B448E MARKII/BA-16
3. Installation
20
Attach all safety devices before using the
sewing machine.
If the machine is used without these devices
attached, injury may result.
CAUTION
q
e
w
q
3-21 . Installing the motor cover
1. Install the motor cover
q
to the motor back cover
w
with the screws
e
and the flat washers
r
.
2. Pass the motor shaft through the notch in the motor
back cover
w
, and then tighten the screws
y
and
the washers
u
so that the clearance between the
motor pulley
t
and the motor cover
q
is uniform.
3-22 . Installing the spool stand
Assemble the spool stand
q
while referring to the spool
stand instruction manual, and then install the spool stand
q
at the right side of the work table.
3-23 . Installing the eye guard
Install the eye guard assy
w
to the face plate
q
with the
two screws
e
.
w
q
e
r
t
y
u
