Brother IntelliFAX 2480C User Manual Download Page 127

Page: 127 / 164

Troubleshooting and Routine Maintenance

111

For 1200 dpi, press the number of the
test print that most closely matches the
number 0 sample (1-8).

1200dpi Adjust

Select Best #5

Press

Stop/Exit

Checking the ink volume

You can check the ink that is left in the
cartridge.

Press

Ink

(FAX-2480C) or

(FAX-2580C).

Press

to choose

Ink Volume

Press

The LCD shows the ink volume.

Ink Volume

BK:-

nnnonnn

Press

to choose the color you

want to check.

Press

Stop/Exit

Uninstalling the handset and
handset cradle (FAX-2480C)

If you do not use the handset and the handset
cradle, you can remove them.

Uninstalling the handset and handset
cradle

Unplug the curled handset cord from the
machine.

Pull the tab (1) back and hold it in
position as you push the cradle to the
back of the machine.

Summary of Contents for IntelliFAX 2480C





































































































































































Search results

Summary of Contents for IntelliFAX 2480C

Reviews:

Brother IntelliFAX 2480C, User Manual, Page: 127 / 164

Search results

Summary of Contents for IntelliFAX 2480C

Reviews: