Prepare Your Network for Scanning with Your Computer
74
4
Configure Network Scanning for Macintosh
4
If you followed the network installation steps in the Quick Setup Guide, your Brother machine was added to
your network automatically. Otherwise, add it to your network using ControlCenter2.
To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can
add or change the address settings from the Control Panel.
1
Click the
(ControlCenter2) icon in the Dock.
The
ControlCenter2
window appears.
2
Select
Other
from the
Model
pop-up menu.
The
Device Selector
window appears.
3
Click the
+
button. The setting window appears.
Summary of Contents for ImageCenter ADS-2400N
Page 37: ...General Information 21 1 3 Select Initial Setup in the folder tree Windows ...
Page 41: ...General Information 25 1 3 Select General Setup in the folder tree Windows ...
Page 45: ...General Information 29 1 3 Select Language in the folder tree Windows ...
Page 256: ...Routine Maintenance 240 9 4 Firmly push the Output Tray into the machine ...
