Brother HL-S7000DN Series Service Manual Download Page 27

Page: 27 / 460

1-4

Confidential

1.5 Paper

1.5.1 Paper handling

Specifications are subject to change without prior notice.

1.5.2 Media specifications

Specifications are subject to change without prior notice.

1.5.3 Type and size of paper

The printer loads paper from the installed paper tray or the manual feed slot.
The names of the paper trays in the printer driver as follows:

Model

HL-S7000DN

Paper Input

Paper tray 1

500 sheets

Paper tray 2/3/4 (Optional) 500 sheets

MP tray

For USA 100 sheets (20 lb),
Except for USA 100 sheets (80 g/m

)

Paper Output Face-Down Output tray

For USA 500 sheets face down (20 lb),
Except for USA 500 sheets face down (80 g/m

)

Face-Up Output tray

100 sheets face-up (straight paper path)

Output tray (Optional)

500 sheets

2-sided

Yes

Model

HL-S7000DN

Media Types

Paper tray 1

Plain Paper, Thin Paper, Recycled Paper

Paper tray 2/3/4 (Optional) Plain Paper, Thin Paper, Recycled Paper
MP tray

Plain Paper, Thin Paper, Thick Paper, Recycled
Paper, Bond

2-sided

Plain Paper, Thin Paper, Recycled Paper

Media weight Paper tray 1

60 to 105 g/m

(16 to 28 lb)

Paper tray 2/3/4 (Optional) 60 to 105 g/m

(16 to 28 lb)

MP tray

60 to 163 g/m

(16 to 43 lb)

2-sided

60 to 105 g/m

(16 to 28 lb)

Media size

Paper tray 1

A4, Letter, B5 (JIS), A5, A5 (Long Edge),
Executive, Legal, Folio

Paper tray 2/3/4 (Optional) A4, Letter, B5 (JIS), A5, Exective, Legal, Folio
MP tray

Width 76.2 - 216 mm, Length 127 - 355.6 mm
(Width 3.0 - 8.5 inch, Length 5.0 - 14 inch)

2-sided

A4, Letter, Legal, Folio

The name for the paper trays

The name for the paper trays in the printer driver

Paper tray 1 (T1)

Tray 1

Paper tray 2 (T2)/3 (T3)/4 (T4)

Tray 2/Tray 3/Tray 4

Multi-Purpose tray

MP Tray

2-sided

Summary of Contents for HL-S7000DN Series













































































































































































































































































































































































































































































Search results

Summary of Contents for HL-S7000DN Series

Reviews:

Brother HL-S7000DN Series, Service Manual, Page: 27 / 460

Search results

Summary of Contents for HL-S7000DN Series

Reviews: