manualshive.com logo in svg

Brother HL-L8260CDN, Online User'S Manual

Share
Download
Brother HL-L8260CDN Online User'S Manual Download Page 373

 Home > 

Machine Settings

 > 

Change Machine Settings from the Control Panel

 > 

Settings and Features

Tables

 > Settings Tables (HL-L8360CDW/HL-L9310CDW)

Settings Tables (HL-L8360CDW/HL-L9310CDW)

Related Models

: HL-L8360CDW/HL-L9310CDW

 

[Settings]

Level 2

Level 3

Level 4

Descriptions

Toner

Toner Life

-

View the approximate remaining toner life.

Test Print

-

Print a test page.

Calibration

Calibrate

Initiate colour calibration to check and correct colours.

Reset

Reset the calibration parameters to the default settings.

Registration

-

Align the print position of each colour.

Network

-

-

Access the Network setting menus.

Tray Setting

-

-

Access the tray setting menus.

Wi-Fi Direct

-

-

Access the Wi-Fi Direct setting menus.

All Settings

-

-

Configure the detailed settings.

[All Settings]

 > 

[General Setup]

Level 3

Level 4

Level 5

Descriptions

Tray Setting Paper Type

MP Tray

Select the paper type that matches the paper in the MP tray.

Tray 1

Select the paper type that matches the paper in the
standard paper tray.

Tray 2

1

Select the paper type that matches the paper in the Optional
Tray (Tray 2).

Tray 3

2

Select the paper type that matches the paper in the Optional
Tray (Tray 3).

Tray 4

2

Select the paper type that matches the paper in the Optional
Tray (Tray 4).

Paper Size

MP Tray

Select the size of paper you loaded in the MP tray.

Tray 1

Select the size of paper you loaded in the standard paper
tray.

Tray 2

1

Select the size of paper you loaded in the Optional Tray
(Tray 2).

Tray 3

2

Select the size of paper you loaded in the Optional Tray
(Tray 3).

Tray 4

2

Select the size of paper you loaded in the Optional Tray
(Tray 4).

Paper Low
Notice

Paper Low
Notice

Select whether to display a message telling you that the
paper tray is nearly empty.

Notice
Level

Select the minimum paper level that will trigger the
message.

Check Size

-

Select whether to display a message telling you to check
that the size of the paper in the machine and the machine's
Paper Size setting match.

Tray Use

-

Select the tray that will be used.

368

Summary of Contents for HL-L8260CDN






















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands