manualshive.com logo in svg

Brother HL-L5000D, User Manual

Share
Download
Brother HL-L5000D User Manual Download Page 45

 Home > 

Paper Handling

 > Change the Tray Size for 2

‑

sided Printing

Change the Tray Size for 2

‑

sided Printing

When you print on both sides of the paper, you must set the 2-sided tray size to the paper size. If you do not set
the 2-sided tray, the paper will not feed correctly, resulting in a skewed printout or a paper jam.

This feature is not available in some countries.
1. Slide the lever on the 2-sided tray to the correct paper size.

(a)

(b)

a. A4 (for A4)
b. Letter (for Letter, Legal, Mexico Legal, India Legal and Folio)

  Related Information

•

Paper Handling

 

40

Summary of Contents for HL-L5000D




































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands