manualshive.com logo in svg

Brother HL-L5000D, User Manual

Share
Download
Brother HL-L5000D User Manual Download Page 259

 Home > 

Troubleshooting

 > 

Paper Jams

 > Paper is Jammed in the Back of the Machine

Paper is Jammed in the Back of the Machine

If the machine's control panel or the Status Monitor indicates that there is a jam in the back (Rear) of the
machine, follow these steps:
1. Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the

machine.

2. Open the back cover.

3. Pull the green levers at the left and right sides toward you to release the fuser cover.

  WARNING

HOT SURFACE
The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching
them.

4. Use both hands to gently pull the jammed paper out of the fuser unit.

254

Summary of Contents for HL-L5000D




































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands