Brother HL-L2375DW, Online User'S Manual

Page: 68 / 247

Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless
Network > Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast
Configure Your Machine for a Wireless Network When the SSID Is Not
Broadcast
Related Models : HL-L2357DW/HL-L2352DW/HL-L2375DW
Before configuring your machine, we recommend writing down your wireless network settings. You will need
this information before you continue with the configuration.
1. Check and write down the current wireless network settings.
Network Name (SSID)
Communication Mode Authentication Method Encryption Mode Network Key
Infrastructure Open System NONE -
WEP
Shared Key WEP
WPA/WPA2-PSK AES
TKIP
For example:
Network Name (SSID)
HELLO
Communication Mode Authentication Method Encryption Mode Network Key
Infrastructure WPA2-PSK AES 12345678
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
2. Press
a
or
b
to select the
[Network]
option, and then press OK .
3. Press
a
or
b
to select the
[WLAN]
option, and then press OK .
4. Press
a
or
b
to select the
[Setup Wizard]
option, and then press OK .
5. When
[WLAN Enable?]
appears, press
b
to select On.
This will start the wireless setup wizard. To cancel, press
a
.
6. The machine will search for your network and display a list of available SSIDs. Press
a
or
b
to select the
[<New SSID>]
option, and then press OK .
7. Enter the SSID name, and then press OK .
8. Select the
[Infrastructure]
option, and then press OK .
9. Press
a
or
b
to select the Authentication Method you want, and then press OK .
10. Do one of the following:
• If you selected the
[Open System]
option, press
a
or
b
to select the Encryption Type
[None]
or
[WEP]
,
and then press OK .
If you selected the
[WEP]
option for Encryption Type, enter the WEP key, and then press OK .
• If you selected the
[Shared Key]
option, enter the WEP key, and then press OK .
• If you selected the
[WPA/WPA2-PSK]
option, press
a
or
b
to select the Encryption Type
[TKIP+AES]
or
[AES]
, and then press OK .
64