manualshive.com logo in svg

Brother HL-L2375DW, Online User'S Manual

Share
Download
Brother HL-L2375DW Online User'S Manual Download Page 165

 Home > 

Troubleshooting

 > 

Paper Jams

 > Paper is Jammed in the Paper Tray

Paper is Jammed in the Paper Tray

If the machine's control panel or the Status Monitor indicates that there is a jam in the paper tray, follow these
steps:
1. Pull the paper tray completely out of the machine.

2. Slowly pull out the jammed paper.

Pulling the jammed paper downward using both hands allows you to remove the paper more easily.

3. Fan the stack of paper to prevent further jams, and slide the paper guides to fit the paper size.

4. Make sure the paper is below the maximum paper mark (

b

 

b

 

b

).

5. Put the paper tray firmly back in the machine.

  Related Information

•

Paper Jams

 

161

Summary of Contents for HL-L2375DW
























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands