III-4
3.3
Top Cover
(1)
Open the top cover.
(2)
Press the hinges at the left and right ends of the top cover inwards to release the
top cover from the main cover.
Note:
If it is impossible to release the top cover in the above way, press the side of the
top cover (
) while pulling the side of the main cover (
).
Fig. 3.3
3.4
MP Sheet Feeder 1 ASSY
Note:
When disassembling the MP sheet feeder ASSY, the grease which smears your
fingers will stick to the separation pad or the paper pick-up roller, and then
spread to the paper and the drum unit. It might cause to appear black spots on
the printing page.
(1)
Slide the upper portion of MP sheet feeder 1 toward you and remove it.
Fig. 3.4
Main cover
Top cover
Top cover
Main cover
MP sheet feeder 1
MP sheet feeder 2
Main cover
Summary of Contents for HL HL-1060
