Brother HL-B2000D Online User'S Manual Download

Page: 27 / 207

Home >

Paper Handling

Load Paper

Load and Print Paper in the Manual Feed Slot

> Load and Print on

Envelopes in the Manual Feed Slot

Load and Print on Envelopes in the Manual Feed Slot

When you load a different paper size in the tray, you must change the Paper Size setting in the machine or on
your computer at the same time.

1. Open the machine's back cover (the face up output tray).

The machine automatically turns on Manual Feed mode when you load paper in the manual feed slot.

2. Pull down the two green levers, one on the left side and one on the right side, as shown in the illustration.

3. On the front of the machine, open the manual feed slot cover.

4. Use both hands to slide the manual feed slot paper guides to fit the width of the paper that you are using.

5. Using both hands, put one envelope in the manual feed slot until the front edge touches the paper feed roller.

When you feel the machine pull it in, let go.

Summary of Contents for HL-B2000D
















































































































































































































Search results

Summary of Contents for HL-B2000D

Reviews:

Related manuals for HL-B2000D

Brands by name

Popular brands

Brother HL-B2000D, Online User'S Manual

Search results

Summary of Contents for HL-B2000D

Reviews:

Related manuals for HL-B2000D

Brands by name

Popular brands