manualshive.com logo in svg

Brother HL-B2000D, Online User'S Manual

Share
Download
Brother HL-B2000D Online User'S Manual Download Page 14

 Home > 

Introduction to Your Brother Machine

 > Status Messages (for LCD models)

Status Messages (for LCD models)

Related Models

: HL-B2050DN

LCD language is not available for Chinese. Read the following explanation for your reference.

Machine Status Message

Meaning

Cooling Down

The machine is cooling down.
Wait for a few seconds until the inside of the machine has cooled down.

Cancel Printing

The machine is cancelling the job.

Please Wait

The machine is warming up.

Printing

The machine is printing.

Ready

The machine is ready to print.

Sleep

In Sleep Mode (Power Save Mode), the machine acts as if it is turned off, but it can still
receive data. Receiving a print job will wake the machine and it will start printing.

Deep Sleep

In Deep Sleep Mode (lower power consumption than Sleep Mode), the machine acts as
if it is turned off, but it can still receive data. If the machine does not receive data for a
certain length of time while it is in Sleep Mode, it enters Deep Sleep Mode. Receiving a
print job will wake the machine and it will start printing.

  Related Information

•

Introduction to Your Brother Machine

 

10

Summary of Contents for HL-B2000D
















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands